Solar EPCs · Rooftop installers · PM-KUSUM / PM Surya Ghar vendors · C&I developers
Rooftop RCC and tin-shed structures, ground-mounted fixed tilt, elevated / carport and PM-KUSUM structures, plus rails, purlins and clamps — in pre-galvanised or hot-dip galvanised steel.
Overview
We design and fabricate solar module mounting structures (MMS) for rooftop, ground-mounted and elevated systems. Sections are roll-formed from galvanised steel, punched and cut to length in-house, and supplied as complete kits with fasteners.
Solar EPCs, rooftop installers, PM-KUSUM and PM Surya Ghar vendors and C&I developers get structures engineered for site wind load, with drawings and BOM supplied with every order.
Structures sized for site basic wind speed and terrain category.
Choose pre-galvanised or hot-dip galvanised to suit site and budget.
Columns, rafters, purlins, bracing, clamps and fasteners, with BOM.
Structures for PM-KUSUM and PM Surya Ghar rooftop programmes.
Range
Fixed-tilt structures for flat concrete roofs — standard and elevated heights.
View details
Low-profile rails and clamps that fix modules directly to metal roof sheets.
View details
Fixed-tilt tables for utility, C&I and open-access solar plants.
View details
Raised structures that generate power while providing shade for parking and walkways.
View details
Ground-mounted structures for PM-KUSUM solar pumps and feeder-level plants.
View details
C and Z purlins, rails, mid and end clamps, and fasteners — supplied separately.
View detailsFAQ
It depends on structure type (RCC flat roof vs tin-shed), height, material (pre-galvanised or hot-dip galvanised), wind zone and order size. Elevated structures use more steel per kW. Send your plant size, roof type and location for a quote.
Hot-dip galvanising after fabrication gives a thicker zinc coat, including on cut edges and holes, and suits ground-mounted, coastal and agricultural sites. Pre-galvanised is lighter and economical for many rooftop systems. We will recommend based on site and tender specs.
Yes. We fabricate ground-mounted structures for PM-KUSUM component A and C systems to the specification issued by the implementing agency.
Yes. Every order includes general arrangement drawings and a bill of materials. Structural design calculations can be provided on request.
Guides
2 Oct 2026 · 5 min read
Roof type, height, material and wind zone — how structure cost per kW is worked out.
Read article25 Sept 2026 · 5 min read
How the two coatings differ, where each fits, and what tenders typically ask for.
Read article18 Sept 2026 · 4 min read
What PM-KUSUM structures need, and how to source them reliably at scale.
Read articleGet in touch
Windows for a home, reinforcement for your shop floor, structures for a solar plant or sheets for a roof — get a quote within one working day.
