Solar Mounting Structures
Fixed-tilt structures for flat concrete roofs — standard and elevated heights.
For flat RCC roofs we supply fixed-tilt structures anchored to the slab with foundation pedestals or chemical anchors. Standard-height structures suit most homes; elevated structures keep the roof usable underneath.
Each structure is sized for the module layout and local wind speed, and supplied as a kit with fasteners and drawings — ready for PM Surya Ghar and commercial rooftop projects.
Photos of recent installations are available on request.
Standard structures keep the lower edge a short height above the slab. If you want to use the roof below, an elevated structure gives walking clearance at higher steel cost.
It depends on structure type (RCC flat roof vs tin-shed), height, material (pre-galvanised or hot-dip galvanised), wind zone and order size. Elevated structures use more steel per kW. Send your plant size, roof type and location for a quote.
Hot-dip galvanising after fabrication gives a thicker zinc coat, including on cut edges and holes, and suits ground-mounted, coastal and agricultural sites. Pre-galvanised is lighter and economical for many rooftop systems. We will recommend based on site and tender specs.
Yes. We fabricate ground-mounted structures for PM-KUSUM component A and C systems to the specification issued by the implementing agency.
Yes. Every order includes general arrangement drawings and a bill of materials. Structural design calculations can be provided on request.
Low-profile rails and clamps that fix modules directly to metal roof sheets.
View details
Fixed-tilt tables for utility, C&I and open-access solar plants.
View details
Raised structures that generate power while providing shade for parking and walkways.
View detailsGet in touch
Windows for a home, reinforcement for your shop floor, structures for a solar plant or sheets for a roof — get a quote within one working day.
